Cookie Img
Home » Products » Paints & Coatings » Acrylic Polymer Additive

Acrylic Polymer Additive

Acrylic Polymer Additive
Acrylic Polymer Additive
Product Code : 10
Price And Quantity
  • Minimum Order Quantity
  • No minimum order quantity
  • Unit of Measure
  • Liter/Liters
Product Description

Multi-purpose pure Acrylic Polymer Additive for building uses is available to add to cement and mortar mixtures. This is ideal to improve adhesion, flexibility, workability and abrasion resistant features. It enhances resistance to chemicals and salts. With unique acrylic emulsion, it is used in concrete casting as well as cement mixtures. It can improve concrete strength and decrease the ratio of water as well as cement in cement mixtures. The sealing prevents water penetration in the concrete and accelerated erosion from weathering.

Tested bacterially and approved in UK Labs  IMSL MICROBIOLOGOCAL SERVICES LTD . Test no. 1013627, 55/4515.

Properties :

  • Attach to cement mixtures molecularly and be an integral part of them.

  • Enhances toughness of plaster of buildings

  • Fitness improves the bond of the mortar used to paste tiles.

  • Improves bonding and sealing properties

  • Enhances workability, strength and flexibility

  • Ensures abrasion and resistance to chemicals

  • Improves efflorescence control.

  • Improves water infiltration resistant

  • Odor-free and water-based

  • Easy to apply

  • Provides the workability required

  • Reduces water to cement ratio

  • Transparent

  • Does not change the texture of the concrete.

Applications :

  •  10% supplement for any cement mixture.

  •  Casting concrete.

  • Ceramic glue

  • Clay cement to paste tiles

  • Marble

  •  Mortar

  • Mosaic

  • Terrazzo

Technical  specifications:

  • Abrasion – 120 microns – 500 cycles (Gardner) ASTM.

  • Consumption: 10% of the cement quantity in the combination (first layer mortar -0.4 liter lit./M2 thickness 5 mm, plaster – 0.5 l/m2 10 mm broad, clay flooring-1 lit./m2 thickness 10 mm).

  • Density – 1.0-1.1 gm\cm3 .

  • Flexibility - 1 mm (Sheen).

  • Hardness — 3 Dg (Ericsson).

  • PH 7-8.

  • Scrub resistance – least of 200 cycles according to the Israeli standard 1945.

  • Viscosity – 13 seconds Cups # 4.

Contains:

  • Acrylic emulsion.

  • Advanced fungicides and preservatives.

  • Flexibility improver and advanced materials.

  • Improves resistance to UV.

  • Wetting agents and leveling materials.

Shade:

White and transparent after drying.

Gloss:   

Silky.
 
Preparing cement mixtures with additive Cement Bond 22:

  • The clay on blocks all kinds (first layer):

    • 10 buckets.

    • A bag 50 kg of cement.

    • 1 canister 5 liter cement Bond 22.

    • Water as needed.

  • Textured coat exterior harsh/abrasive blasting/delicate implication:

    • 5 buckets sand rough aggregate.

    • 5 buckets of sand quarry.

    • 1 bucket of quicklime.

    • 2 buckets of white cement.

    • 2 cans 5 liters cement Bond 22.

    • Water as needed.

  • Clay for floor tiles, terrazzo and marble:

    • 15 buckets of sand.

    • A 50 kg bag of cement.

    • 1  canister 5 liter cement Bond 22

    • Water as needed while mixing in.

  • Plaster (alignment layer):

    • 18 buckets of sand.

    • A bag 50 kg of cement.

    • 1 canister 5 liter cement Bond 22.

    • Water as needed.

  • Schlicht:

    • 12 buckets of sand filtered for schlicht.

    • 10 buckets lime filtered off.

    • 1 bucket of cement.

    • 1 canister cement Bond 22.

    • Water as needed.

 Application methods:

  • 10% of the cement mixture

  • Blend well

  • Add minimum water for more consistent mixture and workability.

Dilution:

Water.

Surface preparation:

  • Careful cleaning from dust, dirt and loose paint.

  • Old external wall washing with water at the min 150 atm. pressure

 Packing:

  • 5 liter

  • 18 liters.

Storage:

  • In a cool and shaded in the room temperature.

  • Not freezing durability (excluding export model).

Shelf life:

12 months

Cleaning tools:

Tap water and soap

Quality control:

  • In house quality testing lab as per specifications

  • ISO 9001-2008, COA and COC certificate

Safety precautions:

  • As it is inedible, so keep away from children.

  • It is flammable; hence keep away from fires, flames, heated areas, and sparks

  • Do not smoke near it or in working area

  • Good air ventilation should be there while applying. If there is not enough air, use ventilation as per the ventilation table.

  • Wear safety suits, glasses and gloves

  • Avoid direct paint contact with the skin and eyes. Immediately wash thoroughly in case of any contact

  • Immediately call doctor in case of any injury

  • Read all safety instructions carefully on the labels and also see M.S.D.S

Warnings:

  • Don’t mix it with any product that is not recommended

  • Don’t apply under +7°C temperature

  • Don’t apply over 80% humidity

  • While applying without air, never throw it on anybody as a direct hit can be fatal at pressures of more than 150 atm.

  • Read carefully all the technical data listed in the section and for any clarification, you can contact to our tech. department.

  • All the listed information is a recommendation only and cannot be used in the court of law.

  • The costumer must examine & check that the availed product is attuned with his demands and equipment.

  • The listed information in this section is given as per the laboratory conditions (temperature, humidity etc.) that the products were checked.

  • The recommendations listed do not hold any accountability for this product.

  • Theoretical and actual coverage area are different concepts, the genuine coverage is affected by the necessary thickness of the layers, requisite number of layers, conditions of painting including the quantity of paint that spread in the air prior touching the surface.

  • The information of this section is based on understanding and accumulating data, we have the right to modify the information any time.

  • Paints that are in stagnant position or exposed to air more than requirement can change their qualities.

Clarifications:

  • Store at 15°C to 25°C temperature

  • Over Spray: Dust is created by dry gases of the air that causes the paint particles to fall on the surface. The impact becomes stronger owing to over pressure and heat. To evade the negative effect, the pressure of the spraying must be lowered to the essential minimum. A different possibility is to augment the amount of the thinner that cause the paint particles to fall wetter on the surface.

  • An additional suggested possibility is to add a retarder to enhance the time of painting application, hence increases the drying up time, and enabling it to reach the surface wetter

  • Pot Life: The working time that is possible to paint a mixture of two components, without spoiling the properties of the paint or disqualifying the paint.

  • Spray: A sprayer with a container to hold paint can be used to spray with air pressure.

  • Airless: a device having a piston to compresses the air for spraying paints.

  • Surface preparations: the level of cleanness is judged by international standards. This process comprises cleansing sand blasting to attain optimal results for painting adhesion. These standards are evenly compared to the Swiss SA, the German-Din the U.S SSPC SP standards. For each standard, there are indicators to make visual contrast between the surface cleansing and the indicator.

Quality inspection:

  • Prior to large surfaces’ painting, it is essential to test the product on a small area to ensure that the paint is attuned with the level of satisfactory.

  • Laboratory testing is done as per the standards institution specifications.

  • This "Data sheet" specified as noncommittal information, the product is recommended for specialized painting specialists. This information is not an alternate to personal guidance.

  • You should read the MSDS safety instructions carefully before start working with the product.

Trade Information
  • FOB Port
  • ASHDOD ISRAEL
  • Payment Terms
  • Cash Advance (CA), Cash in Advance (CID), Letter of Credit (L/C), Paypal
  • Delivery Time
  • 7 days after payment in ASHDOD port or BEN gurion airport Days
  • Sample Available
  • Yes
  • Sample Policy
  • Free samples are available
  • Packaging Details
  • in case in carton boxes pallets
  • Main Export Market(s)
  • Middle East
  • Main Domestic Market
  • All India
  • Certifications
  • ISO9001-2008

DENBER PAINTS AND COATINGS ISRAEL LTD.

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



DENBER PAINTS AND COATINGS ISRAEL LTD. All Rights Reserved.