|Home||» Products||» Paints||» Anti Bacterial Emulsion Paint|
Unique acrylic Bacterinol Bio - Anti Bacterial Emulsion Paint is available to kill and prevent fungus, rot as well as mold development. This also provides complete protection from serious infectious diseases such as MRSA, swine flu, E. coli bacteria, etc. It prevents the development of bacteria causes mildew and odors.
Tested and approved in the UK laboratories IMSL MICROBIOLOGOCAL SERVICES LTD . Test No. 1013627,55 / 4515 Test No. 1013627,49 / 4510
Anti-bacterial, kills bacteria and prevents diseases, acts as a catalyst paralyzing the enzyme used in oxygen metabolism of bacteria, viruses (viruses) and fungus (are single-celled and can not exist in his environment) and are killed.
Prevents mold, rot, fungus, mildew, odors
Odorless, water-based, easy to apply.
Blocks moisture and allows evaporation ("breathing wall")
Very washable and durable scrubbing
Excellent adhesion capacity infrastructure
White and shades.
Flexibility - 1 mm (Sheen)
Hardness - 3 Dg (Ericsson)
Erosion - 120 micron - 500 cycles (BYK Gardner) ASTM
Scrubbing resistance - minimum 200 cycles according to Israeli Standard 1945
Suggested layer thickness - 40-60 microns.
Multiple layers recommended - 2-3.
Density - 1.4-1.5 gm \ cm3
Coverage - 1 liter to 5-10 m2
Viscosity - 7-11 Pa.sec (Haake)
Fungicides, pure silver, preservatives.
Fine acrylic emulsion.
Materials for superior flexibility.
Self-Leveling wetting materials.
Thixotropic film and other additives.
UV resistance improvers.
Bright white and other shades as per Standard Dnbercryl catalogue.
Catalog of 1000 shades.
Dry to the touch:
Add water and reduce air pressure if "dust" was created during splattering
Drying between layers:
Final 12 hours.
First layer - 20-30%
Second layer - 5-20%
Clean from dust, grease, dirt and loose paint.
Renew external wall with pressure of 150 atm.
Fill holes and cracks using Denber Acrylic Schpachtel
Spray primer Denberol super.
If the old paint is peeled off, take it away completely and spread Denbercryl 4000 diluted 30% with water.
If the wall is deteriorating – use a layer of denbertex primer.
Renewing interior walls – seal holes and cracks using denberschpachtel and sand with sandpaper and spread Denberol or better smear layer of Denbercryl 4000.
Internal wall - Denberol super or Denbercryl 400,
External wall - Denberol super or Denbercryl 4000
Old and crumbling external wall with primer "Denbertex Primer".
At room temperature in cool shaded and protected place having proper ventilation
Keep the lids closed tightly
Water and soap
In house quality testing lab as per specifications
ISO 9001-2008, COA and COC certificate
As it is inedible, so keep away from children.
It is flammable; hence keep away from fires, flames, heated areas, and sparks
Do not smoke near it or in working area
Good air ventilation should be there while applying. If there is not enough air, use ventilation as per the ventilation table.
Wear safety suits, glasses and gloves
Avoid direct paint contact with the skin and eyes. Immediately wash thoroughly in case of any contact
Immediately call doctor in case of any injury
Read all safety instructions carefully on the labels and also see M.S.D.S