Cookie Img
Home » Products » Paints & Coatings » Aquaflex Polyurethane Water Based Paints

Aquaflex Polyurethane Water Based Paints

Aquaflex Polyurethane Water Based Paints
Aquaflex Polyurethane Water Based Paints
Product Code : 03
Trade Information
  • Minimum Order Quantity
  • No minimum order quantity
  • Unit of Measure
  • Liter/Liters
  • FOB Port
  • Payment Terms
  • Cash Advance (CA), Cash in Advance (CID), Letter of Credit (L/C), Paypal
  • Delivery Time
  • 7 days after payment in ASHDOD port or BEN gurion airport Days
  • Sample Available
  • Yes
  • Sample Policy
  • Free samples are available
  • Packaging Details
  • free sample without transportation cost
  • Main Export Market(s)
  • Middle East
  • Main Domestic Market
  • All India
  • Certifications
  • ISO-9001-2008
Product Description

Aquaflex Polyurethane Water Based Paints is a Special Polyurethane Resin and Water Dilution Painting System ideal for metal, concrete, galvanized steel as well as other applications.


  • Outstanding anti rust primer

  • Protect from rust and humidity penetration.

  • Flexible

  • Decorative coat

  • High-quality adhesion to metal and concrete.

  • Superior workability.

  • High build

  • High spreading ability.

  • Solvent less

  • Can be applied in close rooms having low ventilation.

  • Strong & abrasion resistant.

  • High percentage of anti-rust pigments

  • UV resistant

  • Ideal for exterior painting.

  • Washable as well as exterior weather resistant.


  • As an alternate to synthetic oil paints

  • Concrete

  • Cement plaster walls.

  • Food tankers, particularly for dry powders tankers.

  • Flour, rice and food powders conveying lines.

  • Kitchens & dining halls

  • Painting in rooms

  • Iron surfaces uncovered to atmosphere conditions

Technical Data:

  • Adherence strength: 0.72 MPa.sec.

  • Density: 1.3-1.4 gm\cm 3

  • Flexibility: 1 mm (sheen).

  • Hardness: >3 Dg (Erichsen).

  • Recommended dry thickness: 200-250 mic.

  • Solids content: 67%.

  • Stretching strength: 30 kg\cm 2

  • Theoretical spreading rate: 1 liter to 4-5 sqm.


  • Additives.

  • Anticorrosive pigments for primer.

  • Decorative atmosphere resistant pigments.

  • Emulsifiers.

  • Polyurethane resin diluted with water.

  • UV rejection additive.

  • Wetting and self levelling additives.


  • Primer - red \ brown.

  • Top coat - white or other by any catalog.


  • Primer - mate.

  • Top coat - silky \ gloss.

Touch - drying time:

1-2 hours.

Repainting Gap Time:

6-24 hours, as per the temp.

Recommended Application Methods:

  • Spray

  • Roller

  • Brush

  • Don not apply in rainy day.

Instruction for Use:

  • Open carefully

  • Stir well.

  • Surface must be clean

  • Add 5% water for brush or roller and 10-20% for spraying.

  • Add 0-5% water for airless usage

  • Paint a coat of 200-250 mic.

  • Metal painting - one coat of 100-125 mic. Primer and one top coat of 100-125 mic.

Surface Preparation:

  • Metal - Perfect surface cleaning required, suggested sand blast SA- 2.5

  • Concrete - sand blast cleaning should be done for light roughness. Grooves are filled with Acrylic schpachtel paste.

  • Galvanize steel - must be sanded and cleaned well with degreazer M to take away all dirt, grease , etc.


Aquaflex primer.

Top Coat:

Aqua flex top coat.


  • 5 liters

  • 18 liters


  • Appropriate shaded room temp. with complete ventilation

  • Keep lids hermetic sealed.

Shelf Life:

12 month

Clean Up:

Water and soap

Quality control:

  • In house quality testing lab as per specifications

  • ISO 9001-2008, COA and COC certificate

Safety precautions:

  • As it is inedible, so keep away from children.

  • It is flammable; hence keep away from fires, flames, heated areas, and sparks

  • Do not smoke near it or in working area

  • Good air ventilation should be there while applying. If there is not enough air, use ventilation as per the ventilation table.

  • Wear safety suits, glasses and gloves

  • Avoid direct paint contact with the skin and eyes. Immediately wash thoroughly in case of any contact

  • Immediately call doctor in case of any injury

  • Read all safety instructions carefully on the labels and also see M.S.D.S


  • Don’t mix it with any product that is not recommended

  • Don’t apply under +7°C temperature

  • Don’t apply over 80% humidity

  • While applying without air, never throw it on anybody as a direct hit can be fatal at pressures of more than 150 atm.

  • Read carefully all the technical data listed in the section and for any clarification, you can contact to our tech. department.

  • All the listed information is a recommendation only and cannot be used in the court of law.

  • The costumer must examine & check that the availed product is attuned with his demands and equipment.

  • The listed information in this section is given as per the laboratory conditions (temperature, humidity etc.) that the products were checked.

  • The recommendations listed do not hold any accountability for this product.

  • Theoretical and actual coverage area are different concepts, the genuine coverage is affected by the necessary thickness of the layers, requisite number of layers, conditions of painting including the quantity of paint that spread in the air prior touching the surface.

  • The information of this section is based on understanding and accumulating data, we have the right to modify the information any time.

  • Paints that are in stagnant position or exposed to air more than requirement can change their qualities.


  • Store at 15°C to 25°C temperature

  • Over Spray: Dust is created by dry gases of the air that causes the paint particles to fall on the surface. The impact becomes stronger owing to over pressure and heat. To evade the negative effect, the pressure of the spraying must be lowered to the essential minimum. A different possibility is to augment the amount of the thinner that cause the paint particles to fall wetter on the surface.

  • An additional suggested possibility is to add a retarder to enhance the time of painting application, hence increases the drying up time, and enabling it to reach the surface wetter

  • Pot Life: The working time that is possible to paint a mixture of two components, without spoiling the properties of the paint or disqualifying the paint.

  • Spray: A sprayer with a container to hold paint can be used to spray with air pressure.

  • Airless: a device having a piston to compresses the air for spraying paints.

  • Surface preparations: the level of cleanness is judged by international standards. This process comprises cleansing sand blasting to attain optimal results for painting adhesion. These standards are evenly compared to the Swiss SA, the German-Din the U.S SSPC SP standards. For each standard, there are indicators to make visual contrast between the surface cleansing and the indicator.

Quality inspection:

  • Prior to large surfaces’ painting, it is essential to test the product on a small area to ensure that the paint is attuned with the level of satisfactory.

  • Laboratory testing is done as per the standards institution specifications.

  • This "Data sheet" specified as noncommittal information, the product is recommended for specialized painting specialists. This information is not an alternate to personal guidance.

  • You should read the MSDS safety instructions carefully before start working with the product.


Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.