|Home||» Products||» Paints & Coatings||» Balcony Floor Tiles Clear Sealer|
Balcony Floor Tiles Clear Sealer
- Minimum Order Quantity
- No minimum order quantity
- Unit of Measure
- FOB Port
- ASHDOD ISRAEL
- Payment Terms
- Cash Advance (CA), Cash in Advance (CID), Letter of Credit (L/C), Paypal
- Delivery Time
- 7 days after payment in ASHDOD port or BEN gurion airport Days
- Sample Available
- Sample Policy
- Free samples are available
- Packaging Details
- in case in carton boxes pallets
- Main Export Market(s)
- Middle East
- Main Domestic Market
- All India
Balcony Floor Tiles Clear Sealer
Liquid coat of hybrid polyurethane Balcony Floor Tiles Clear Sealer is developed with unique technology, one component humidity cure. This impregnates and fills cracks in balcony floors up to 3 mm. It can be poured easily in 1 mm coat over the tiles. It is super flexible with 250% elongation rate and has very strong adhesion. This is highly durable in various temperatures and deep freezing conditions. It is suitable for all tiles including filling cracks and gaps between plates. It offers ideal sealing against rain as well as moisture. It strengthens the existing infrastructure and ensures to create smooth layer of coating that is abrasion proof.
Durable against scratches
Durable in dry heats up to 200°C on short periods and up to 100°C for long periods
Outstanding adhesion to all tiles.
250% elongation seals
Alkali and acid resistant in 5% concentration like sulfuric acid, caustic soda, lemon/citrus, acetic acid
Durable in Acetone, Toluene,
Heavy duty-thick layer.
High mechanical strength
Excellent erosion durability.
Mechanical shock absorber.
Easy to apply with roller, spray and brush
Perfect sealing against water
Prevent penetration to the infrastructure
Resistant to abrasion
Thin liquid penetrate
Very high flexibility
Return to original shape without any deformation
For sealing floors of balcony
For sealing terrace exposed to rain
For sealing natural stones and marble.
For sealing planter
For sealing window box
For sealing wet floors
For sealing decorative concrete floors
For sealing concrete floors
For sealing concrete roofs and tiles.
Adhesion to concrete
Density – 600mPs
Density: 0.9-1.0 gm\cm³ (DIN 51575. 1.3 – RAL7032
Dry to touch – 3 hr.
Erosion endurance: 4200 cycle (BYK gardner)
Final dry time: 3 days.
Flexibility – 1 mm (Sheen)
Hardenes – Shore D – 75
Hardness :> Dg 10 (ERICSON)
Layer thickness – 1 mm
Number of recommended coats: one thick.
Tear resistance – 50 N/mm
Humidity sensitive additives
Special hybride Polyurethane polysiloxan resin mixtures.
Any ordered color
Glossy, matte powder makes it matte
2-3 hours at 25°C , for walking on it – 24 hours. Final – 3 days...
Casting \ spreading by brush or roller + stitch roller
For very large areas, a spray is used
Pour the required quantity
Spread on all the tiles area
Dry after 24 hr
Spread the matte powder over the surface to penetrate the coat
Sweep the extra powder with broom
Should be clean completely from dirt, grease and water.
If tiles are very glossy it is suggested to sand lightly.
1+0.18 kg powder, 5+1kg powder, 18+3kg powder liters. (every package comes as kit with matte powder)
Store in a shaded place, between 15°C-32°C.with suitable ventilation.
Keep lids tightly sealed.
Shelf life span:
Use D-11 thinner instantly after applying.
In house quality testing lab as per specifications
ISO 9001-2008, COA and COC certificate
As it is inedible, so keep away from children.
It is flammable; hence keep away from fires, flames, heated areas, and sparks
Do not smoke near it or in working area
Good air ventilation should be there while applying. If there is not enough air, use ventilation as per the ventilation table.
Wear safety suits, glasses and gloves
Avoid direct paint contact with the skin and eyes. Immediately wash thoroughly in case of any contact
Immediately call doctor in case of any injury
Read all safety instructions carefully on the labels and also see M.S.D.S
Don’t mix it with any product that is not recommended
Don’t apply under +7°C temperature
Don’t apply over 80% humidity
While applying without air, never throw it on anybody as a direct hit can be fatal at pressures of more than 150 atm.
Read carefully all the technical data listed in the section and for any clarification, you can contact to our tech. department.
All the listed information is a recommendation only and cannot be used in the court of law.
The costumer must examine & check that the availed product is attuned with his demands and equipment.
The listed information in this section is given as per the laboratory conditions (temperature, humidity etc.) that the products were checked.
The recommendations listed do not hold any accountability for this product.
Theoretical and actual coverage area are different concepts, the genuine coverage is affected by the necessary thickness of the layers, requisite number of layers, conditions of painting including the quantity of paint that spread in the air prior touching the surface.
The information of this section is based on understanding and accumulating data, we have the right to modify the information any time.
Paints that are in stagnant position or exposed to air more than requirement can change their qualities.
Store at 15°C to 25°C temperature
Over Spray: Dust is created by dry gases of the air that causes the paint particles to fall on the surface. The impact becomes stronger owing to over pressure and heat. To evade the negative effect, the pressure of the spraying must be lowered to the essential minimum. A different possibility is to augment the amount of the thinner that cause the paint particles to fall wetter on the surface.
An additional suggested possibility is to add a retarder to enhance the time of painting application, hence increases the drying up time, and enabling it to reach the surface wetter
Pot Life: The working time that is possible to paint a mixture of two components, without spoiling the properties of the paint or disqualifying the paint.
Spray: A sprayer with a container to hold paint can be used to spray with air pressure.
Airless: a device having a piston to compresses the air for spraying paints.
Surface preparations: the level of cleanness is judged by international standards. This process comprises cleansing sand blasting to attain optimal results for painting adhesion. These standards are evenly compared to the Swiss SA, the German-Din the U.S SSPC SP standards. For each standard, there are indicators to make visual contrast between the surface cleansing and the indicator.
Prior to large surfaces’ painting, it is essential to test the product on a small area to ensure that the paint is attuned with the level of satisfactory.
Laboratory testing is done as per the standards institution specifications.
This "Data sheet" specified as noncommittal information, the product is recommended for specialized painting specialists. This information is not an alternate to personal guidance.
You should read the MSDS safety instructions carefully before start working with the product.