|Home||» Products||» Paints & Coatings||» Denber Metal Hit - Hammer Effect Paints|
Denber Metal Hit - Hammer Effect Paints
- Minimum Order Quantity
- No minimum order quantity Liter
- FOB Port
- ASHDOD ISRAEL
- Payment Terms
- Cash Advance (CA), Cash in Advance (CID), Letter of Credit (L/C), Paypal
- Delivery Time
- 7 days after payment in ASHDOD port or BEN gurion airport Days
- Sample Available
- Sample Policy
- Free samples are available
- Packaging Details
- in case in carton boxes pallets
- Main Export Market(s)
- Middle East
- Main Domestic Market
- All India
Denber Metal Hit - Hammer Effect Paints
Silicon copolymer rust converter Denber Metal Hit - Hammer Effect Paints are flowery paints developed for embellishment of different rusty metal surfaces. For direct painting, there is no primer needed and no strict surface grounding.
Can be directly applied on rust.
Decorative flowery paint in numerous shades.
Durable in wet surroundings.
Easy to implement
For interior and exterior applications
Good exterior durability.
High adhesive ability.
No primer required.
Prevent rust from spreading.
Top coat fast drying.
For painting shutters, windows, banisters and tin doors
For un-smooth surface metal castings
Light illumination pillars and lamps
Metal fences, elevators, air-conditioning systems,
Metal furniture, working tools etc.
Abrasion 120 mic. Film - 760 cycles.
Consumption – 125 mic. wet paint leaves 25 mic. Dry film .
Density- 1.1-1.3 gr/cm 3•
Flexibility- 1 mm (SHEEN).
Hardness - >3 Dg (Erichsen).
Layer thickness: 50-60 micron dry.
Suggested number of layers - 2
Solids (%)- 40% in aluminum shade, 55% in black shade.
Theoretical surface coverage- 1 liter to 4-6 m 2, in two layers.
Viscosity – 1-2 Pa.Sec (HAAKE).
Aluminum, fillers, pigments.
Rust converter, inhibitor.
Solvents and additives.
Special synthetic rapid alkyd.
Styrene acrylic special resin.
As Per the catalog.
Matte, Silk, Gloss.
Touch-Dry time:< 30 minutes.
Dry Between Layers:
1 hours, Final: 24 hours in room temp.
Final – 7 days.
Spray-.25-35% Denber metal hit thinnerD-51 , 3-4 atm. pressure.
Airless- 0-5% Denber metal hit thinner D-51, 5-6 atm. pressure, 0.015" nozzle.
Brush and roller- 10-15% Denber metal hit thinner D-51.
Make sure that the surface is properly cleaned and free from dust, dirt, and old loose paint.
Heavy rust layers as well as loose rusty parts must be removed
Sand it as possible.
For non-ferrous metals- It can be painted directly if adhesion is fine.
Good sanding is required
Store in well shaded place at room temp.
Denber metal hit Thinner D-51.
In house quality testing lab as per specifications
ISO 9001-2008, COA and COC certificate
As it is inedible, so keep away from children.
It is flammable; hence keep away from fires, flames, heated areas, and sparks
Do not smoke near it or in working area
Good air ventilation should be there while applying. If there is not enough air, use ventilation as per the ventilation table.
Wear safety suits, glasses and gloves
Avoid direct paint contact with the skin and eyes. Immediately wash thoroughly in case of any contact
Immediately call doctor in case of any injury
Read all safety instructions carefully on the labels and also see M.S.D.S
Don’t mix it with any product that is not recommended
Don’t apply under +7°C temperature
Don’t apply over 80% humidity
While applying without air, never throw it on anybody as a direct hit can be fatal at pressures of more than 150 atm.
Read carefully all the technical data listed in the section and for any clarification, you can contact to our tech. department.
All the listed information is a recommendation only and cannot be used in the court of law.
The costumer must examine & check that the availed product is attuned with his demands and equipment.
The listed information in this section is given as per the laboratory conditions (temperature, humidity etc.) that the products were checked.
The recommendations listed do not hold any accountability for this product.
Theoretical and actual coverage area are different concepts, the genuine coverage is affected by the necessary thickness of the layers, requisite number of layers, conditions of painting including the quantity of paint that spread in the air prior touching the surface.
The information of this section is based on understanding and accumulating data, we have the right to modify the information any time.
Paints that are in stagnant position or exposed to air more than requirement can change their qualities.
Store at 15°C to 25°C temperature
Over Spray: Dust is created by dry gases of the air that causes the paint particles to fall on the surface. The impact becomes stronger owing to over pressure and heat. To evade the negative effect, the pressure of the spraying must be lowered to the essential minimum. A different possibility is to augment the amount of the thinner that cause the paint particles to fall wetter on the surface.
An additional suggested possibility is to add a retarder to enhance the time of painting application, hence increases the drying up time, and enabling it to reach the surface wetter
Pot Life: The working time that is possible to paint a mixture of two components, without spoiling the properties of the paint or disqualifying the paint.
Spray: A sprayer with a container to hold paint can be used to spray with air pressure.
Airless: a device having a piston to compresses the air for spraying paints.
Surface preparations: the level of cleanness is judged by international standards. This process comprises cleansing sand blasting to attain optimal results for painting adhesion. These standards are evenly compared to the Swiss SA, the German-Din the U.S SSPC SP standards. For each standard, there are indicators to make visual contrast between the surface cleansing and the indicator.
Prior to large surfaces’ painting, it is essential to test the product on a small area to ensure that the paint is attuned with the level of satisfactory.
Laboratory testing is done as per the standards institution specifications.
This "Data sheet" specified as noncommittal information, the product is recommended for specialized painting specialists. This information is not an alternate to personal guidance.
You should read the MSDS safety instructions carefully before start working with the product.