|Home||» Products||» Paints & Coatings||» Denbercryl Light Emitting Paint|
Denbercryl Light Emitting Paint
- Minimum Order Quantity
- No minimum order quantity
- Unit of Measure
- Minimum Order Quantity
- FOB Port
- ASHDOD ISRAEL
- Payment Terms
- Cash Advance (CA), Cash in Advance (CID), Letter of Credit (L/C), Paypal
- Delivery Time
- 7 days after payment in ASHDOD port or BEN gurion airport Days
- Sample Available
- Sample Policy
- Free samples are available
- Packaging Details
- 2016-12-24 09:12:51
- Main Export Market(s)
- Middle East
- Main Domestic Market
- All India
Acrylic water based Denbercryl Light Emitting Paint emits light in darkness. This high quality paint is ideal for painting interior walls, doors as well as shelters. This is also suitable for painting warning signs and guidance when the light is off. It is used for painting exits as well as escape routes located at the emergency points. It gets charged with light and emits light in darkness.
After light shuts off, it shines in yellow-green bright light.
Can be applied easily on any white primer.
Easy to apply
Superior mechanical strength.
Have to be coated outdoors
Restricted resistance for outdoor conditions.
Exceptional adherence to the surface.
Super bright light
Very smooth coat.
Cinema and halls
Headers and emergency exits.
Lines and direction gaudiness
Signs and traffic directions
Coverage area: 1 liter per 5-6 sqm. (on white primer coat)
Density: 1.3-1.45 gm/cm3
Flexibility: 1 mm (Sheen)
Hardness: >3 Dg (Erichsen)
Recommended layer thickness: 40-80 microns.
Recommended number of layers: 2
Recommended thickness: 80-120 mic. dry
Resistance to abrasion – 350 cycles (BYK Gardener)
UV endurance: 3-6 months, should be coated with UV durable lacquer for exterior use.
Viscosity: 2.5-3.5 Pa.sec (Haake)
Advanced flexibility and leveling material.
High quality acrylic emulsion.
Wetting and leveling materials.
Drying time period between layer applications:
6 hours. Final: 24 hours.
Brush, spray, roll.
Airless: 5%-10% water. Pressure 5-6 atm. nozzle 0.015”
Brush/roller: 5-10% water.
Spray: 12-30% water.
Clean the surface from dust, grease or loose paint.
Wood: sand well, fill halls using denberschpachtel for wood
Apply a denbercoat primer white.
Walls: wash at 150 atm. pressure using water, fill all cracks with Denber Schpachtel acrylic with Denberschpachtel
Apply primer white coat of denbertex primer.
Galvanized steel – Tutgum galvanize.
Iron – Denberust white, Epoxyden primer white,
Walls – Denbertex primer
Wood – Denbercoat, Compact schpachtel
1 liter, 5 liters, 18 liters.
In a shaded and cool place at room temperature having suitable ventilation.
Keep the lids closed.
This is not resistant to freeze (except the export model)
Shelf life span:
With water instantly after usage..