|Home||» Products||» Sealings||» Oil and Grease Remover|
These highly professional industrial oil removers are available n the industry for removing all kinds of oils and grease. After dissolving these the oil become milky in water contact (makes emulsion) and washes it simply. A specific mix of emulsifiers and solvents, which together work as a powerful oil dissolver and can be washed with water, allowing dissolving of oils as well as other lubricants in industry, which can be washed off with water, after melting. These products are available with surfactants and other soap product materials and completely clean all kinds of lubricants as well as lubrication industrial products.
Quality degreaser fit for utilization without dilution or mixing.
Make effect on the oil or grease soundly and melt, absorb or breaks them. Join with the oil and become colloid with physical contacts of water and prevent easily as soap.
Makes the grease and oils to act as washable materials such as soap, when the water touch the colloid these make become milky white and wash up oil.
Cleanup of the oil area perfectly without leaving oily substance or grease.
Simple to apply in all ways.
Can be utilized as the materials, which clean systems gently and regularly, water-wash-off can be done at any time and all the time.
Used for the industry of cleaning machines by washing and spreading in water.
Cleaning transports motors by the dispersion the Al Shemen N on them and can be washed with water pressure.
For military arms systems for oil and grease separation like in chains and Tanks bearings while and before alternating to new oils and grease.
For the cleanup of greasy floors in garages as well as industry. By scattering on the floor and sanded with broom these can be washed with water.
Theoretical surface extent- 1 liter/4 m 2 .for every day oils quantity, which spread from industrialized machines or on truck motors.
Layer dimension: 250 mic.
Advisable layers number- 1 for full coating..
Consistency – 13 sec. #4
Density- 0.8-1.0 gr/cm3.
Constructions for use:
Cleaning metals: Spread or Deep Al Shemen N and after few minutes can be washed with water.
Car engines cleanup: Can be sprayed on all of the engine parts and can be washed with high pressure water.
Floors cleanup in garages as well as in industry: spread the Al Shemen N on the flooring can be sand well with the street brooms and can be washed with water.
Surfactants and Soaping materials
Emulsifiers or Wetting Agents
In blocked places – forced airing must be put-upon..
While dispersion of the material – a correct mask must be utilized with the solvent filter.
Brush, Spray, Airless, Roller,
No concentration aloud. Fit for usage.
Separation of big massive oils and grease.
5 liters, 18 liters., 200 liters,
Keep in well shaded spot, room temp with correct ventilation.
Keep the lids compactly closed.
One year in original package.
Tools for Cleaning:
In factory labs in accordance with the specifications.
COA and COC certificate.
Uneatable, keep these away from the reach of kids.
While using these, comely air ventilation is important. In that case there is not adequate air, use ventilation in accordance with the ventilation table.
Do wear protective glasses, gloves and suits.
Obviate direct connection of the paint with the skin and eyes. In case of contact, instantly wash completely with water.
In case of an ill health directly get doctors' assistance.
Read the safety instruction manuals.
Don’t blend the products with materials that were not suggested by us.
Don’t utilize in a rainy day or if the temperature is under +7°C.
Don’t apply if wetness is over 80%
When utilizing with Airless, do not purpose it at anybody an undeviating hit could be deadly at pressures over 150 atm.
Read completely the technical information of the product cataloged in this section; confirm that all info is interpreted entirely, for interpretation contacts to tech. department.
All info that is recorded in this content is a testimonial merely and cannot be used in the court of law.
The customer must test as well as check that the product is congenial with his instrumentality and needs.
The information enrolled in this section is reported to the laboratory states (temperature, humidity etc.)
The testimonials listed do not hold any obligation for this product.
Theoretic and actual coverage regions are assorted concepts, the actual extent is affected by the needed thickness of the sheets, needful number of sheets, painting states including the quantity of paint that spread in the air before contacting the surface.
The info is based on experience and collecting data, Denber inc., has the right to change modify or change info listed at any time.
Paints, which have been in inaction or open to air more than needful could have their qualities transformed.
Storage should be of room temperature 15°C to 25°C .
Over Spray: The effect that occurs in the spraying of paints usage. A type of "dust" is made by dry gases of the air that causing the paint molecules to fall dry on the opencast. The contact of this "effect" turns powerful due to over heat and pressure. To avoid the negative effect of the "effect", the pressure of the dispersion should be reduced to the essential minimum. Another outlook is to enhance the amount of the diluent in the substance that would cause the paint molecules to slip wetter on the surface.
The extra recommended prospect, to debar this "effect", is to add a retarder to the substance that increases the duration time period of the painting usage and sanctioning it to range the surface wetter, Hence a finer painted smooth layer is made.
Pot Life : The working time that is achievable to paint the mixture of two elements, A+B (or more) without unmaking the qualities of the paint or disabling the paint as "closed use".
Spray: It is achievable to spray with the sprayer, which has a instrumentation keeping the paint, which sprays it with air pressure.
Airless: The device with a composer that squeezes the air for dispersion of paints. The pressure can be advanced (over 100atm.)
Surface preparations: The cleanness level is ascertained by international standards. Surface formulations, including cleansing sand blaring, is crucial & captious factor in attaining the great results for painting stickiness on the certain surface. These regulations are evenly compared to the regulations of the the German-Din, Swiss SA, the U.S SSPC SP for all standards in all levels. There are indicators available so as make visual relation between the cleaning of the surface and the indicators.
Preceding to the painting on large opencast it is crucial to run the product on the small area, to be convinced that the paint is congenial with the satisfactory level.
Laboratory experiment was made in accordance with the standards institution specifications.
This "Data sheet" conferred as an noncommittal info is recommended for professed painting experts. This info is not a secondary to personal guidance.
You must go through the MSDS safety manual before you start working these.