|Home||» Products||» Paints||» Water Based Polyurethane Paints|
Aquaflex Polyurethane Water Based Paints is a Special Polyurethane Resin and Water Dilution Painting System ideal for metal, concrete, galvanized steel as well as other applications.
Outstanding anti rust primer
Protect from rust and humidity penetration.
High-quality adhesion to metal and concrete.
High spreading ability.
Can be applied in close rooms having low ventilation.
Strong & abrasion resistant.
High percentage of anti-rust pigments
Ideal for exterior painting.
Washable as well as exterior weather resistant.
As an alternate to synthetic oil paints
Cement plaster walls.
Food tankers, particularly for dry powders tankers.
Flour, rice and food powders conveying lines.
Kitchens & dining halls
Painting in rooms
Iron surfaces uncovered to atmosphere conditions
Adherence strength: 0.72 MPa.sec.
Density: 1.3-1.4 gm\cm 3
Flexibility: 1 mm (sheen).
Hardness: >3 Dg (Erichsen).
Recommended dry thickness: 200-250 mic.
Solids content: 67%.
Stretching strength: 30 kg\cm 2
Theoretical spreading rate: 1 liter to 4-5 sqm.
Anticorrosive pigments for primer.
Decorative atmosphere resistant pigments.
Polyurethane resin diluted with water.
UV rejection additive.
Wetting and self levelling additives.
Primer - red \ brown.
Top coat - white or other by any catalog.
Primer - mate.
Top coat - silky \ gloss.
Touch - drying time:
Repainting Gap Time:
6-24 hours, as per the temp.
Recommended Application Methods:
Don not apply in rainy day.
Instruction for Use:
Surface must be clean
Add 5% water for brush or roller and 10-20% for spraying.
Add 0-5% water for airless usage
Paint a coat of 200-250 mic.
Metal painting - one coat of 100-125 mic. Primer and one top coat of 100-125 mic.
Metal - Perfect surface cleaning required, suggested sand blast SA- 2.5
Concrete - sand blast cleaning should be done for light roughness. Grooves are filled with Acrylic schpachtel paste.
Galvanize steel - must be sanded and cleaned well with degreazer M to take away all dirt, grease , etc.
Aqua flex top coat.
Appropriate shaded room temp. with complete ventilation
Keep lids hermetic sealed.
Water and soap
In house quality testing lab as per specifications
ISO 9001-2008, COA and COC certificate
As it is inedible, so keep away from children.
It is flammable; hence keep away from fires, flames, heated areas, and sparks
Do not smoke near it or in working area
Good air ventilation should be there while applying. If there is not enough air, use ventilation as per the ventilation table.
Wear safety suits, glasses and gloves
Avoid direct paint contact with the skin and eyes. Immediately wash thoroughly in case of any contact
Immediately call doctor in case of any injury
Read all safety instructions carefully on the labels and also see M.S.D.S